Silver Cross 3D Manual De Instrucciones página 3

4
3.1
3.2
3.3
All manuals and user guides at all-guides.com
Using your 3D as a pram
3.1 Lift the leg supports to the upper
position, so that they touch the bumper
bar (see point 9.1).
3.2 Recline the seat to the lie flat position by
releasing the mechanism at the back of
the seat.
3.3 Remove the head support by releasing
the zip and then releasing the harness
(see point 6.2). Feed the harness
through the harness button holes.
3.4
3.5
3.6
Using your 3D as a pram (cont.)
3.4 Flip the head support over so that it is
upside down and place over the buckle
so that the head support is now laying
in the 'seat' of the pushchair (under the
head of the pram liner)
3.5 Pull the fabrics over and under at the
handle end of the seat. Ensuring that the
recline mechanism can pass through the
opening in the liner.
3.6 Now pull the liner over the bumper bar,
and under the leg support. The liner will
attach with velcro underneath the leg
support.
silvercrossbaby.com
5