Tabla de contenido
Publicidad
6
3.7
3.8
3.9
All manuals and user guides at all-guides.com
Using your 3D as a pram (cont.)
3.7
Now fit your hood facing towards the
handles. The hood catches should easily
'click' onto the 3D. To lock, put the catch
down. Position the rear elasticated hood
skirt under the leg support joint.
3.8
Slip the apron cover over the bumper
bar end of the pram. Now slide the clips
on your apron on to the attachment
points inside the hood to enclose the
pram.
3.9
Your 3D Pram System is now ready for
use
WARNING: Do not add a
separate mattress.
4.1
4.2
Using your 3D as a pushchair
4.1
Attach your hood facing towards the
bumper bar. The hood catches should
easily 'click' into position. Lock them in
place by pushing the securing
catch down.
4.2
Select the position you require for the
seat back (see point 7.2) and the leg
support (see point 9.2).
Your 3D Pushchair is ready for use.
silvercrossbaby.com
7
Publicidad
Tabla de contenido
