Tabla de contenido
Publicidad
16
15.1
15.2
15.3
All manuals and user guides at all-guides.com
Unfolding your 3D
15.1
To unfold your 3D release the folding
lock by pulling up on each of the handle
catches (marked with a number 1) on
both sides of the chassis simultaneously.
15.2
Whilst holding each of the handle
catches (marked with a number 1), pull
upwards on the main handles. The
pushchair may lift off the floor during
this action.
15.3
As the 3D begins to unfold, release the
handle catches and immediately push
down with your foot on the centre of the
main lock to erect your pushchair.
NOTE: It is essential to ensure the
main lock is engaged. Failure to do
so could result in damage to your
pushchair.
15.4
15.5
15.6
17
Unfolding your 3D
15.4
Push the main pushchair handles
upwards to engage the secondary lock.
15.5
Check the secondary lock has engaged
on both sides. If not push down on the
tube to lock.
15.6
Your 3D is ready for use.
silvercrossbaby.com
Publicidad
Tabla de contenido
