Shure WL50 Guia Del Usuario página 8

SPECIFICATIONS WL50
Signal-to-Noise 64 dB at 94 dB
Ratio SPL
Power +5 Vdc on pin 2,
Requirements return on
pin 1 (ground).
60–130 mA
Current Drain
Polarity—Positive pin 3 relative to pin 1 at the output
pressure on the connector of the microphone.
diaphragm produces
a positive voltage at:
Overvoltage N/A
Protection
Cap and Overmold Polypropylene
Material
All manuals and user guides at all-guides.com
{ {
WL50–LO
55 dB at 94 dB
SPL
+5 Vdc on pin 2,
return on
pin 1 (ground).
60–130 mA
N/A
}
MC50 WL51
64 dB at 94 dB 59 dB at 94 dB
SPL SPL
11 to 52 Vdc 11 to 52 Vdc
(positive on pins 2 (positive on pins 2
and 3, return on and 3, return on
pin 1). pin 1).
60–130 mA
4.6 mA
pin 2 relative to pin 3 relative to
pin 3 of the output pin 1 at the output
connector. connector of the
microphone.
±75.0 Vdc
N/A
maximum from
pins 2 and 3 to pin
1.
8
{ }
MC51
59 dB at 94 dB
SPL
+5 Vdc on pin 2,
return on
pin 1 (ground).
4.6 mA
pin 2 relative to
pin 3 of the output
connector.
±75.0 Vdc
maximum from
pins 2 and 3 to pin
1.