GYS RENOV CABLE PTI-PRO - 400 V Manual De Instrucciones página 18

DESCRIPTION OF THE G CLAMP
1- Arm locking/unlocking lever
2- Cooling pipe
3- Gyroscope
4- Pneumatic body
5- Over-opening electrode
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
DISMANTLING THE PTI-S7 HARNESS
1
Remove the two screws holding the harness grommet
2
and all connectors.
3
Remove the right and left arm supports from the PTI-s7.
18
RENOV CABLE PTI-PRO 400V
2
3 4 1 5
Disconnect the power supply to the PTI-s7.
6 7
6- Mobile arm
7- Side handle
8- Remote settings button
9- Spot welding button
EN
8 9