All manuals and user guides at all-guides.com
General Operating Instructions
Turning the Device ON or OFF
1. Pivot the screen downward until a
comfortable viewing angle is reached.
2. Pressing the POWER button on the
lower-left corner of the front panel or
the remote control will turn the device
on or off . When in use, the controls will
be lit.
3. After the device has been turned on
and is displaying a picture, adjust the
viewing angle by pivoting the screen to
optimize the picture quality.
4. Remember to turn the device off and
pivot the LCD panel to the locked
position when not in use.
18
General Operating Instructions
DVD Basics
To get the most use out of each DVD, make
sure you read this section completely.
Regional Coding
Both the DVD player and disc are coded by
region. These regional codes must match
in order for the disc to play. If the codes do
not match, the disc will not play by default.
The system's code is set to region 1. Other
regions may not be played in this system.
Type of Discs Your DVD Will Play
• DVD-Video: DVD contains video.
• CD-DA: CD contains musical or sound
content only.
• CD-Video: CD contains movie only.
• CD-R/RW: A disc that contains audio fi les
(for example, a CD-R with downloaded
MP3 fi les), MPEG, or JPEG fi les.
Loading and Playing Discs
Before you load a disc, make sure that it is
compatible with the player.
Note that the following discs CANNOT be
used with this player: Optical disc- CD-1, CD-
ROM, and DVD-ROM Mini disc- CDG (audio
only, not graphics).