Connecting An Ipod Device - Advent SB7 Manual Del Usuario

All manuals and user guides at all-guides.com

Connecting an iPod Device

Connecting an iPod Device to Your SB7
Active Headrest via USB
Plug the iPod Dock Connector-to-USB cable
into a high-power USB port on your SB7
Active Headrest, and then connect the other
end to the iPod.
See the documentation that came with your
iPod for more information.
Charging the iPod Battery
Connect the iPod to a high-power USB port
on your SB7 Active Headrest. The SB7 Active
Headrest must be turned on.
If the battery icon on the iPod screen shows
a lightning bolt, the battery is charging.
If it shows a plug, the battery is fully
charged.
If you don't see the lightning bolt or the
plug, the iPod might not be connected to a
high-power USB port.
Connecting an iPod Device to Your SB7
Active Headrest via AV Cable
Connect the optional iPod AV cable to the
headphones port on iPod. Note: Use the
iPod AV cable made specifi cally for iPod.
Other similar RCA-type cables might not
work. You can also connect the iPod AV
cable to the LINE-OUT port on the iPod
Universal Dock.
Connect the video and audio connectors to
the AV-IN ports on your SB7 Active Headrest,
as shown.
To View a Video on Your SB7 Active
Headrest
• Connect the iPod to your SB7 Active
Headrest (see above).
• Turn on your SB7 Active Headrest
and set it to display from the input
ports connected to the iPod. See the
documentation that came with your iPod
for more information.
• On your iPod, choose Videos and browse
for video.
The iPod AV cable is sold seperately by Apple.
The iPod Dock Connector-to-USB cable is sold
seperately by Apple.
iPod® is a registered trademark of Apple, Inc.
Connecting an iPod Device
EN
27