Also Available - Marmitek Connect 225 Modo De Empleo

Outputs: 1x VCR OUT Scart (S-VHS) (video, stereo audio).
1x TV OUT Scart (RGB/S-VHS) (video, stereo audio).
1x cinch A/V parallel output for Audio amplifier, Video Sender, modulator, etc
(video, stereo audio).
Accessories: AC/DC Power supply unit
Supplied: Remote Control unit
Instruction Manual
Design and specifications are subject to change without notice

ALSo AVAILABLe

1. Wireless audio and video
You can connect a product from the Marmitek GigaVideo
series to the OUTPUT or AUX connection of the Connect 225
to transmit the audio and video signal wirelessly throughout
the entire house. This means you can also transmit the signal
to a TV in another room and watch the signals from every
device connected to the Connect 225.
The built-in infrared return channel of the GigaVideo series
also means you can control the equipment and the Connect
225 remotely, even through walls and ceilings!
2. Control your Connect 225 and A/V equipment that is
out of sight.
Marmitek offers a range of products to control your equipment
in a closed cabinet or from a different room, both wired and
wireless.
For these so called infrared extensions, more information can
be found at: www.marmitek.com.
3. Audio and video via the coax
The Marmitek MegaVideo and MegaView products give you the
possibility to add the OUTPUT or AUX signal of your Connect 225
as an extra channel to your coax cable. You can watch the signal of
every device connected everywhere in the house where there is a
coax connection. The built-in infrared return channel of f.e. model
Megavideo55 and MegaView70 also means you can control the
equipment and the Connect 225 remotely, even through walls and
ceilings!
Connect 225™
All manuals and user guides at all-guides.com
9