Skil 1558 Manual Original página 5

Planer
INTRODUCTION
This tool is intended for planing wooden materials such
as beams and boards; it is also suitable for chamfering
edges
This tool is not intended for professional use
Read and save this instruction manual
TECHNICAL SPECIFICATIONS
TOOL ELEMENTS
A Storage for key
B Securing bolt
C Cutter block screws
D Knob for setting planing depth
E Planing depth indicator
F Vacuum cleaner adapter
G Chip outlet
H Safety switch
J
K
V-groove
L Ventilation slots
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
all warnings and instructions for future reference. The
term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
b) Do not operate power tools in explosive
liquids, gases or dust. Power tools create sparks
c)
a power tool. Distractions can cause you to lose
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
b)
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
d)
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
1558
moving parts. Damaged or entangled cords increase
e) When operating a power tool outdoors, use an
cord suitable for outdoor use reduces the risk of electric
f) If operating a power tool in a damp location is
Use of an earth leakage circuit breaker reduces the risk
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
moment of inattention while operating power tools may
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
c) Prevent unintentional starting. Ensure the switch
the tool.
switch or energising power tools that have the switch on
d)
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
Save
e)
at all times. This enables better control of the power
f) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
b) Do not use the power tool if the switch does not
controlled with the switch is dangerous and must be
c) Disconnect the plug from the power source and/or
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
5
Any power tool that cannot be
Use of a
A