KRESS Mission KR133E Manual De Usuario página 11

3. Take the screws off the blades with a screwdriver.
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.
Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely.
2
Keep it Clean
WARNING: Before cleaning, turn your Mission
cleaning the blade turning disc and do not rinse or flush with water.
WARNING! YOUR Mission
washer on your Mission
electronic and mechanical parts.
A. Cleaning the Body
Your Mission will live a much happier and longer life if it is cleaned regularly. Since your Mission
TM
electric machine, you will need to take care when cleaning. Hose water clean is supported. It is best to use a
spray bottle filled with water. When cleaning the machine body, use a soft brush or clean cloth and avoid using
solvents or polishes. Lastly, remove all build up of grass clippings and debris.
B. Cleaning the underside
Again, it is important that you power the Mission
OFF and wear protective gloves before
touching the blade turning disc. First, flip your
Mission upside down to expose its underside.
TM
Here you will see the blade disc, the chassis, and
the front wheel and driving wheels. Clean everything
thoroughly with a soft brush or moist rag. Hose
water clean is supported.
Rotate the blade disc to ensure it rotates freely.
Check the blades spin freely around the fixing
screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so
that it does not cause a crack in the blade
disc. Even the tiniest crack can decrease your
Mission 's mowing output.
TM
C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging
station and the charging strips located on the
Mission using a cloth. Remove any built up grass
TM
clippings or debris around the contact pins and
charge strips periodically to ensure the Mission
successfully charges each time.
can only be washed by using a hose! DO NOT use high pressure
TM
. High pressure water can go inside the sealings and damage
TM
TM
TM
OFF. Put on protective gloves before
TM
is an
TM
11
EN