ARENDO 305716 Manual Del Usuario página 25

Ensure that the power plug has been inserted. Insert up to four toast slices
into the toast slot. Turn the "rotary switch provided for adjusting the degree of
toasting" to the desired setting and press the "slide switch" down until it snaps
in place. The degree of toasting is shown briefly in the display and then returns
to the remaining toasting time. The heating elements warm up and the toasting
process begins. The remaining toasting time is now counted down in the display.
Once the process is complete, the "slide switch" automatically jumps back to
its original position. Check if crumbs or pieces of bread prevent the switch from
locking. This means that the toasting process has finished and the bread slices can
be taken out carefully. If the degree of toasting is not satisfactory, adjust it using
the "rotary switch provided for adjusting the degree of toasting" and repeat the
toasting again. In this case, ensure that the toast does not get burnt. If the de-
sired degree of toasting has already been attained, you may then end the process
at any time by pressing the "CANCEL"( )key.
6. Bread roll attachment
Bread rolls, baguettes and loaves are too large to place in the toasting slot. Always
use the integrated bread roll warming rack for this purpose.
Use the lever for the bread roll attachment to open it.
Note: Ensure that the crumb collector has been inserted correctly.
25
English