Display, General View; System Alarms; Navigating Through The Menus - Optimus DC-800ETH Manual De Instrucciones

6. DISPLAY, GENERAL VIEW

In standby, the DC-800ETH displays the following information:
Name: Name, identifier of the unit in the installation
Version: Version of the unit firmware
4 tabs identified by icons are displayed at the top of the screen:
EMERGENCY
This menu allows viewing the units as well as the zones that are
in emergency mode. The following information is displayed by
the tab:

SYSTEM ALARMS

Enables to display the alarms in the system, showing the unit generating the alarm and the type of alarm.
SELECTION OF ZONES / GROUPS / MESSAGES
Allows selecting zones, groups and pre-recorded messages.
SETTINGS
Allows modifying certain parameters of the DC-800ETH (language, passwords, etc).
ATTENTION: In installations with a PC Server, modifications of the settings made from the DC-800ETH are temporary,
excepting the change of the volume of the zones and the assignment of the musical channels. In order for the changes
to be saved, they must be made from the PC Server via the PA Manager application.

7. NAVIGATING THROUGH THE MENUS

Using the navigation buttons you can access the different menus and configurations of the DC-800ETH.
Basic navigation through the menus:
- Move between tabs
(previous tab)
- Return to the top level menu
DC-800ETH version 4.3.001
DC-800ETH
- Move between options in a menu
(previous item)
-
- Move between options in a menu
(next item)
Number of Emergency
Mode zones
Number of zones in Emergency Mode
that are making announcements
- Enter the selected menu
- Confirm a data entry
- Confirm a chosen option
Move between tabs (next tab)
R + D Department
IP Microphone desk
and Control central
Total number of zones
in the installation
Total number of zones
in the installation
12