Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12.10. Stop or activate all the music channels
of the area
(Operator or Administrator user level is required)
Using the / navigation keys, select the settings
1.
menu ( ).
Using the / keys select MUSICAL CHANNELS and
2.
press OK
Using the / keys select START MUSIC if you want to
3.
activate the music channels of the area or STOP MUSIC if
you want to stop the music channels of the area.
4.
Press OK.
12.11. Stop or activate a specific music
channel
(Operator or Administrator user level is required)
Using the / navigation keys, select the settings
1.
menu ( ).
Using the / keys select MUSICAL CHANNELS and
2.
press OK
Using the / keys select CONFIGURE and press OK.
3.
4.
With the SOURCE: text line: selected, press OK.
Using the / keys select the music channel you wish
5.
to activate or stop and press OK.
Press and select ON to activate the channel or OFF to
6.
stop it.
7.
Press OK.
Press , and using the navigation keys / , select
8.
APPLY to apply the new settings or CANCEL to discard
the changes.
9.
Press OK.
DC-800ETH version 4.3.001
DC-800ETH
12.12. Configure music channels
From the keyboard of the paging desk it is possible to
configure the musical sources of the area, assigning zones or
groups to the available musical channels.
Using the / navigation keys, select the settings
1.
menu ( ).
Using the / keys select MUSICAL CHANNELS and
2.
press OK
Using the / keys select CONFIGURE and press OK.
3.
4.
With the SOURCE: text line: selected, press OK.
Using the / keys select the music channel you wish
5.
to configure and press OK.
Press to select the Z + G: text line and press OK.
6.
7.
A list with the name of the zones and their identifiers is
displayed. Press and a list with the name of the
groups and their identifiers will be displayed. Use the
and keys to alternate between the zones list and the
groups list. Once you
navigation keys / to select each of the zones or
groups to which you want to assign the music channel
and press OK. The selected zones and groups are
preceded by [
8.
Once you have selected the zones and groups that you
want to assign to the music channel, press .
Press again, and using the navigation keys / ,
9.
select APPLY to apply the new settings or CANCEL to
discard the changes.
10. Press OK.
Repeat this process for each of the music channels you want
to configure.
(Operator or Administrator user level is required)
see
the desired list, use the
].
*
R + D Department
IP Microphone desk
and Control central
19
Publicidad
Tabla de contenido
