Klarstein CLARA Manual De Instrucciones página 30

EN
30
5
Hang the cooker hood on the bracket
screws. Adjust the position of the
cooker hood. Secure the cooker hood
in the desired position with 2 safety
screws (4 x 30 mm).
Note: The two safety ventilation
slots are located at the rear of the
housing and have a diameter of
6 mm.
6
Adjust the height of the inner chimney
element so that it is level with the
bracket of the inner chimney element
and fasten the inner and outer
chimney elements with 4 screws (4 x
8 mm).