Post Installation; Fixing The Mounting Bracket - Create WIND EASY Manual Del Usuario

P OST IN STALL ATI ON
• Remove the bolt from the seatpost, removing the pin and pass the finial (crown molding)
and hood through the hanger bar. Next, route the fan motor wires through the inside of the
hanger bar. Tighten the hanger bar to the engine and insert the bolt and pin.
Traditional
m ou nt i n g
style
The standard mount hangs from the ceiling
using a rod.
FIX IN G T HE MOU NT I NG B R ACKE T
• The outlet box and beam must be securely mounted and capable of reliably supporting at
least the weight of the fan.
Wood roof
Securely attach the mounting bracket with
wood screws and washers to the ceiling
joints.
Do not fix the mounting bracket directly on ceilings with a thickness less than 10mm to avoid
the risk of the screw loosening.
S u p p o r t
surface
Angle mounting is recommended for a
vaulted or angled ceiling.
Concrete ceiling
Drill holes with an 8mm drill, depending on
the length of the expansion screws. Next,
secure the mounting bracket to the ceiling
with the expansion screws.
20°
Angle mount style
S u p p o r t
surface
E NGLI SH
9