Filling The Reservoir - Philips Sonicare Power Flosser 3000 Serie Manual De Instrucciones

14
English
2
1

Filling the Reservoir

2 Plug the USB-C charging cable into the
USB-C charging port on the back of the
Cordless Power Flosser.
Note: Make sure the handle is completely
dry before you connect the USB-C cable.
3 Connect the USB cable into a 5V USB wall
adapter.
Note: Wall adapter not included in all
models. Only use a 5V IPX4 adapter.
4 The battery indicator flashes while charging
(see 'Charging').
Note: It can take up to 8 hours to fully charge
the battery, but you can use the Cordless
Power Flosser before it is fully charged.
Note: Replace the charging port cover on the
Cordless Power Flosser when not actively
charging.
Fill the reservoir with lukewarm water. There
are two easy ways to fill the reservoir.
Note: When filling reservoir, do not exceed the
max fill line.
Note: Remove the charger from the Cordless
Power Flosser prior to filling the reservoir and
using the device.