User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Sicam SBM V655 Manual Original

en 28 | SBM V655 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Sicam
Tire Service Equipment". These instructions must be
carefully studied prior to start-up, connection and opera-
tion of the SBM V655 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Sicam Tire Service Equipment". These instruc-
tions must be carefully studied prior to start-up, connec-
tion and operation of the SBM V655 and must always be
heeded.
2.3

Electromagnetic compatibility (EMC)

The SBM V655 satisfies the requirements of the EMC
directive 2004/108/EG.
i
The SBM V655 is a class/category A product as
defined by EN 61 326. The SBM V655 may cause
high-frequency household interference (radio inter-
ference) so that interference suppression may be
necessary. In such cases the user may be required to
take the appropriate action.
|
656 234 2010-11-22
All manuals and user guides at all-guides.com
3.
3.1
The SBM V655 is a wheel balancing machine with me-
chanical attachment for the balancing of passenger
vehicle and motorcycle wheels with a rim diameter of
10"– 30" and a rim width of 1"– 20". The SBM V655 is
to be used exclusively for this purpose and solely for
the range of applications specifi ed in these instruc-
tions. Any other purpose is not consistent with the in-
tended use and is therefore not permissible.
i
3.2
The SBM V655 must be installed on a flat surface
made of concrete or similar material and anchored in
position.
i
3.3
Designation
SBM V655
Quick-action clamping nut
Centering flange
Centering cones (3x) and adapters
Manual vernier caliper
Weight pliers
Measuring compasses
Calibrating weight
3.4
Designation
Wheel lift
Set of quick-action clamping cones M10x1.25 612 100
Third centering cone dia. 89 to 132 mm
Fourth centering cone dia. 120 to 174 mm
Spacer ring for rims (large rim offset)
Three-arm flange for light commercial
vehicles
Clamping kit for swinging arms (dia. 19 mm) 654 060
Infinitely variable universal flange for cars
(3-4-5 hole)
Motorcycle flange
Shaft kit, dia. 10 mm
Calibration weight (calibrated)

Product description

Intended use

The manufacturer cannot accept any liability for pos-
sible damage arising from improper use.

Prerequisites

An uneven or vibrating surface can lead to inaccurate
unbalance measurements.

Scope of delivery

Special accessories

Sicam srl società unipersonale
Order number
Refer to rating
plate
616 200
653 249
–
629 400
606 500
602 700
654 377
Order number
900 004
653 449
606 300
606 200
653 420
654 043
654 039
653 430
654 376