2-6. Extend the Vertical Metal Exterior Bars (A2) as far as
you need to in order to accomodate your soundbar and
TV, however
holes past the TV mounting screw as shown in Fig. 24.
This will allow enough support to safely hold your
soundbar in place.
2-7. In cases in which in you need to extend the Vertical
Metal Exterior Bars (A2) to accommodate a large TV,
you will need to add an additional Washer (R or S) to
the TV mounting holes that are not covered by the
Vertical Metal Exterior Bars (A2). See Fig. 26.
you leave
10
8