Publicidad
Idiomas disponibles
Idiomas disponibles
This is a slot with a larger circle
at the bottom
This is commonly found on center
channel speakers. There is a
threaded nut in the back of the
speaker to screw into.
Some speakers have a separate
bracket which attaches to the back
of the Soundbar.
Measure the distance between the keyhole
openings, screw holes, or mounting brackets on
your soundbar. If the distance between them is
greater than 24.5" (62.2 cm), you will need to use
the Extensions (A4) that came with this Universal
Soundbar Mount.
A. Attach the Extensions (A4) to the Horizontal
Support Plate (A1) as shown in Fig. 4.
B. Secure the Extensions (A4) to the Horizontal
Support Plate (A1) using two Washers (SB) and
two M8 Nuts (AF) for
Tighten all fully using a wrench.
C. Attach the appropriate mounting bracket for
your soundbar as described in pages 6-8.
Extension (A4).
5
Publicidad
