Publicidad
Idiomas disponibles
Idiomas disponibles
1-6. Insert the Long 1" (26 mm) Screw (II) through the center of
the Large Hex Bolt (SB-SC) as shown in Fig. 10 (A longer
1-3/16" (30 mm) Screw (I) has been included if you require a
longer length). Allow about 1/4" (6 mm) of space between the
head of the screw and the Metal Support Plate (SB-SP) to fit
the soundbar's keyhole.
1-7. Place the M10 Hollow Hex Bolt (SB-SC) through the long
slot in the Horizontal Support Plate (A1) and secure using an
M10 Washer (SB-S) and M10 Hex Nut (SB-SCN) as shown
in Fig. 12.
1-8. REPEAT above steps for 2nd Support Bracket.
1-9. Attach your soundbar to the Support Brackets. Insert Long 1"
(26 mm) Screw (II) into the soundbar's keyhole opening.
Make adjustments as necessary. Make sure your soundbar
is centered properly with the Horizontal Support Plate (A1)
and then tighten the M10 Hex Nuts (SB-SCN) fully to lock
the Support Brackets into place.
1-10. Once all parts are correctly in place and securely fastened,
your soundbar from the Support Brackets and set
all parts aside.
1-6. Place the M10 Hollow Hex Bolt (SB-SC) in the Support
Bracket through the long slot in the Horizontal Support Plate
(A1) and secure using an M10 Washer (SB-S) and M10 Hex
Nut (SB-SCN) as shown in Figs. 12 & 13.
1-7. REPEAT above steps for 2nd Support Bracket.
1-8. Using the screws supplied with your soundbar or in the
hardware kit included with your Universal Soundbar Mount,
find the correct screw that fits the screw hole in your
soundbar. It is possible that you may need to get the proper
size screw from your local hardware store.
1-9. Insert the correct mounting screws with Washers
(SB or SB-R) through the Horizontal Support Plate (A1) and
through the open hole in the Support Bracket as shown in
Fig. 14. Screw into soundbar.
1-10. Make adjustments as necessary. Tighten screws enough to
securely hold your soundbar in place. Make sure your
soundbar is centered properly with the Horizontal
Support Plate (A1) and then tighten the M10 Hex Nuts
(SB-SCN) fully to lock the Support Brackets into place.
1-11. Once all parts are correctly in place and securely
fastened,
Brackets and set all parts aside.
your soundbar from the Support
7
Publicidad
