ENG
TURNING ON THE FRONT LAMP.
Caution! Do not look into the light or see the
►
source of the light directly
turn on the light
The lamp keeps on lighting while
►
the switch trigger is being pulled
off 10 -15 seconds after releasing the trigger (4).
SWITCH.
When pressed, the bit will turn, and if not will
►
come to a halt
The spin speed may be controlled
►
by varying pressure on the trigger
gently, the bit will turn slowly, increasing with the
pressure applied.
DRILL-BIT MOUNTING-REMOVING.
Before mounting or removing a drill-bit, first
►
remove the main plug from the socket
cordless demolition hammer drill uses drill-
bits with a special system for quick and easy
mounting
Apply a small amount of grease on
►
the drill-bit shaft
Pull the collar backward and
►
insert the shaft of the drill-bit into the drill chuck
(5)
Turn the drill-bit until the shaft is locked in
►
the drill chuck (6)
Release the collar
►
to remove the drill-bit, pull the collar backward
and remove the drill-bit from the drill chuck (7).
FUNCTION SELECTOR.
For drilling in concrete, masonry, etc. rotate the
►
function selector to the symbol
in wood, metal or plastic materials, rotate the
function selector to the symbol (9)
scaling or demolition operations, rotate the function
selector to the symbol
CHISEL ANGLE.
The chisel can be secured at the desired angle
►
To change the chisel angle, rotate the function
►
selector to the symbol
to the desired angle (12)
selector to the symbol
chisel is securely held in place by turning it slightly.
TURN SELECTOR.
The turn selector only can be activated when
►
the cordless demolition hammer drill is stopped
The turn selector has two different positions
►
For a rotation to the right, set the turn selector
►
to the left position
►
the turn selector to the right position.
MAINTENANCE.
The cordless demolition hammer drill has been
►
designed for a long working life with minimum
maintenance
Optimum use depends on correct
►
Pull the switch trigger to
►
The lamp turns
►
If pressed
►
The
►
In order
►
(8)
For drilling
►
For chipping,
►
(10).
(11)
Turn the chisel
►
Rotate the function
►
(10)
Make sure that the
►
For a rotation to the left, set
care of the cordless demolition hammer drill and
regular cleaning
unplug the cordless demolition hammer drill from
the power source before cleaning or performing
any maintenance
hammer drill may be cleaned effectively using
compressed air after each use
air is not available, use a brush to remove dust
from the cordless demolition hammer drill
ventilation vents and switch levers must be dept
clean and free of foreign matter
to clean by inserting pointed objects through
openings
Cetain cleaning agents and solvents
►
damage plastic parts, among them are gasoline,
carbon tetrachloride, chlorinated cleaning solvents,
ammonia and household cleaners containing
ammonia
Do not use any of these to clean the
►
cordless demolition hammer drill.
ENVIRONMENT PROTECTION.
The materials and components that have
►
been used to manufacture this product can be
re-used and recycled
an Integrated Management System that is in
charge of the correct elimination of the residues
of this product
with domestic residues
clients a free collection service of these residues
through any of its sale points, or in the collection
points established by the Integrated Management
System or in the recycling point of your locality.
WARRANTY AND TECHNICAL SERVICE.
Apart from the legal guarantee, Werku
►
an additional commercial guarantee
commercial guarantee covers the repair of all
defects found due to faults in the materials or
manufacture
necessary for these defects to appear within the
validity period
repair of all defects that Werku
included in the commercial guarantee (shipping
costs, labour costs and materials included) as
chosen by Werku
replacement (if necessary with a later model)
This commercial guarantee does not affect
►
consumer's rights established by law according
to Directive 1999/44/CE
guarantee is valid for 24 months
is destined for professional or industrial use,
the validity period is 12 months
period starts on the date of purchase by the first
consumer
►
5
English
To prevent accidents, always
►
The cordless demolition
►
If compressed
►
►
Werku
is adhered to
►
®
Do not eliminate this product
►
Werku
►
®
For this cover to be effective it is
►
The consumer is entitled to free
►
recognises as
®
, either via the repair or by
®
This commercial
►
►
This date is shown on the invoice or
Motor
►
Do not attempt
offers to its
offers
®
This
►
If this product
►
The validity