Indel B ICEBERG PLUS Serie Instrucciones De Uso página 14

ICE BE RG PLUS 220V
INSTALL ATION
To make sure the minibar is correctly installed it is advisable to:
• ensure it is set on a completely level surface
• guarantee that the minibar is ventilated by practising opening the door for the entry and exit of the air
• the unit is installed by the supervisor
• figure of installation (as figure on page 34).
VENTIL ATION
The absorption refrigeration system gives off heat and requires a good level of ventilation and must
be placed in a well-ventilated environment. The minibar should be installed in an environment with an
opening to provide the necessary change of air and under no circumstances should the grills, which
provide good ventilation for the appliance, be covered or blocked. Also remember never to set the unit
in an area directly exposed to sunlight or near other sources of heat.
Some space of the surrounding furniture should be left free for the minibar ventilation, showed by
figures.
ELECTRICAL CONNECTION AND EARTHING
Before connecting the plug to the mains, make sure the mains voltage corresponds to that shown on
the rating plate (located inside the minibar)and that the socket has a normal earthed system as required
by safety regulations for electrical systems.
The electrical socket must also be able to support the maximum power loading of the appliance
indicated on the plate itself.
Note: It is necessary to plug the power cable to swich on the unit.
WARNING!
If the socket is not fitted with an earthed system or if multiple sockets or adapters are used, the
manufacturer shall not be liable for any injuries to persons or damage to property and/or the minibar
itself.
WARNING!
The user must always be able to access the plug.
WARNING!
If you dispose the fridge, you must take off the front door.
ICEBERG PLUS_(220V)_IM_20220421
14