Adler europe AD 2934 Manual De Uso página 6

battery compartment (4).
3 USING THE DEVICE
1. Remove the protective cap (5).
2. Prior to using the trimmer ensure that skin and
hair are completely dry.
3. Turn the device on by sliding the power switch (3)
up.
4. Place the end of the trimmer lightly on the area
you want to trim. Gently move the trimmer against
hair growth. Do not move it too fast. Slow and
steady movement gives the best results.
Using the eyebrow comb
Select the side of the comb that you want to use.
Insert the eyebrow comb (7) into the trimmer blade
(1). Side that you want to use should match the
trimmer blade (1).
4 CLEANING AND MAINTENANCE
1. Be sure that device is switched off before
cleaning.
2. Clean the device surface with a dry cloth or with a
cloth moistened with water.
3. To clean trimmer more thorough open blade cover
by moving the button downwards (2). Clean with
cleaning brush (6).
5 DISASSEMBLING AND ASSEMBLING THE
BLADE
1.To disassemble the blade open blade cover by
moving blade releasing button downwards (2).
2.To assemble the blade insert the small hook on the
appliance trimmer head into the small hole on the
trimmer blade (1) so they are aligned.
3. Connect both parts and slide the blade release
button(2) upwards to lock the trimmer blade in place.
4. Press both sides of the head to ensure that they
are properly fit.
TECHNICAL DATA:
Battery: 1xAAA (1.5V)
Please transfer cardboard packaging to waste paper. Pour
the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point
storage because it is dangerous in the device
ingredients may pose a threat to the environment. The
electrical device should be handed over to limit its reuse and
use. If in the device there are batteries you have to take out
and give to the point stored separately.
6