Sip Intercom Settings - Optimus AT-M15SIP Manual De Instalación Y Funcionamiento

AT-M15SIP
SIP CEILING SPEAKER
6.4. SIP INTERCOM SETTINGS
This menu is used to set the audio parameters of the unit.
Set Input channel to mic.
Set in Input gain (1‐100) the microphone volume. Set 100 and decrease later if necessary.
Set Automatic Eco Cancelation with AEC level. Use normal by default.
Set in Auto answer time (0‐30) the seconds the unit will wait before answering an incoming call. Set
at least 3 seconds if you want to hear the ring tone.
Set in Ring volume (1‐100) the volume of the ring. Set at least 80 to have standard volume.
Set in Talk volume (1‐100) the volume of the voice. Set at least 80 to have standard volume.
Set in Codec menu, the available codecs of the unit. Priority of the codec is sort by its position on
the screen, the top position is the highest priority one.
AT-M15SIP Version 1.0 Page 8 of 16