Sip Button Settings - Optimus AT-M15SIP Manual De Instalación Y Funcionamiento

AT-M15SIP
SIP CEILING SPEAKER
6.7. SIP BUTTON SETTINGS
This menu is used to set the calls activated by contact input.
Set Button Mode to trigger, for pulse activation, or to Hold, for level activation.
Set Button to hang up Allow, to permit hanging up the calls by closing the contact.
Set in Button1, the function of the input contact, set Call for SIP calls and Paging for paging calls.
Set in Destination the number of the extension to call.
Button2 and button3 has no function in this device.
AT-M15SIP Version 1.0 Page 11 of 16