Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PARTS

1
2
1. Front Plate
2. Control Panel
3. Air Outlet
LOCATION
Excess moisture will travel throughout your home, in the same way that cooking smells
waft to every room in the house. For this reason, the dehumidifier should be positioned,
so that it can draw this moist air towards it from all over the home.
Alternatively, if you have a serious problem in one area you can begin by positioning the
dehumidifier close to this area and later moving it to a more central point.
When positioning the dehumidifier, ensure that it is placed on a level surface and that
there is a minimum of 10 cm (4") of space on either side of the unit to allow for efficient
airflow.
This dehumidifier is fitted with castors for extra mobility, if you move the unit, it should
first be switched off and the water tank emptied.
We do not recommend the use of an extension lead, so please try to ensure that the unit is
sufficiently close to a fixed mains socket. If it is necessary to use am extension lead, please
ensure the diameter of the wires of the cable is at least 1 mm
When the dehumidifier is in operation, outside doors and windows should be closed when
necessary for most efficient use.
34
5
6
3
4
4. Handle
5. Wire holding bracket
6. Power cable
www.romusworld.com
www.romusworld.com
7. Filter inlet
8. Main housing
9. Water tank
.
2
194407
EN
7
8
9

Publicidad

Tabla de contenido
loading

Productos relacionados para Romus D-20L

Este manual también es adecuado para:

194407

Tabla de contenido