Full Memory Reset; Firmware Update; Ce Declaration Of Conformity - Fermax AC-MAX Manual De Instalación

Cod. 970077 V08_19

4.6 Full memory reset

Full memory reset erases current settings, including users data base and restores factory default
settings.
Reset procedure
1. Switch off power supply to FPAC-MAX FINGERPRINT.
2. Connect CLK terminal with IN2 terminal. (terminals of the fingerprint reader itself)
3. Switch on power supply to FPAC-MAX FINGERPRINT. The reader shall generate continuous
acoustic signal.
4. Disconnect CLK and IN2 terminals. (terminals of the fingerprint reader itself)
Communication parameters after reset:
• IP address = 192.168.0.70
• Subnet mask = 255.255.255.0
• Port = 13544
• Communication is encrypted with default (empty) password

4.7 Firmware update

Firmware update is performed by means of AC-MAX HW software. In order to update the firmware
after establishing connection with FPAC-MAX FINGERPRINT:
1. Select the command Tools in the top menu of AC-MAX HW software and then select Update
Firmware.
2. In the opened window select FPAC-MAX FINGERPRINT firmware file (*.frg extension) by means
Select file
of the button
3. Select the button
AC-MAX FINGERPRINT keeps all its settings (including IP address) after firmware update.

CE DECLARATION OF CONFORMITY

Hereby, FERMAX ELECTRONICA, S.A.U., declares that this FINGERPRINT FPAC-MAX Ref. 5225, is in
compliance with the essential requirements of Directive RED 2014/53/UE and Directive RoHS
2011/65/UE. See website www.fermax.com. FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
https://www.fermax.com/intl/en/pro/documents/technical-documentation/DT-13-declarations-of-
conformity.html
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT – DIRECTIVE
2012/19/UE
The device you have purchased is identified under Directive 2012/19/EU on
waste electrical and electronic equipment.
This symbol placed on a product or packaging indicates that the product
should not be disposed of with other wastes as this may have a negative
impact on the environment and health. The user is obliged to deliver
equipment to the designated collection points of electric and electronic
waste. For detailed information on recycling, contact your local authorities,
waste disposal company or point of purchase. Separate collection and
recycling of this type of waste contributes to the protection of the natural
resources and is safe to health and the environment. Weight of the
equipment is specified in the document.
All manuals and user guides at all-guides.com
Update
in order to upload the firmware to FPAC-MAX FINGERPRINT
26/26