Carton Contents; Charger Operation - SNOWJOE SUNJOE 24V-HCSWP-LTE Manual De Instrucciones

Unpacking

Carton Contents

• Pruning saw + removable battery compartment
• Pole assembly
• iON+ 24V lithium-ion battery
• iON+ 24V lithium-ion battery charger
• Bar and chain oil
• Wrench
• Manual with registration card
1. Carefully remove the cordless pole + pruning saw and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pole + pruning saw. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
Lights Light Indicators
Charge level button
The battery is at 30% capacity
The battery is at 60% capacity
The battery is fully charged
NOTE: If the battery indicator button does not appear to be
working, charge the battery.
customer service center at
®
NOTE: Immediately after using the battery pack, the battery
indicator button may display a lower charge than it will if
checked a few minutes later. The battery cells "recover" some
of their charge after resting.

Charger Operation

m
WARNING!
Only charge Sun Joe
battery pack with compatible Sun Joe
chargers. Other types of chargers may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to enter
into the charger.
Charging the Battery
1. Push the push lock buttons on either side of the battery
pack to pull it out from the battery compartment (Fig. 1)
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then plug the
charger into an appropriate AC power outlet. Connect the
charger plug into the charging socket of the battery to
start charging (Fig. 2).
9
24V lithium-ion
®
24V lithium-ion
®
Fig. 1
Push lock button
Battery
indicators
Fig. 2