Installation - Klarstein MONUMENTA Manual Del Usuario

EN
18

INSTALLATION

Preparation
If you have an outlet to the outside, your cooker hood
can be connected as below picture by means of an
extraction duct (enamel, aluminium, flexible pipe or
inflammable material with an interior diameter of
150 mm).
Before installation, turn the unit off and unplug it
•
from the outlet.
The cooker hood should be placed at a distance of
•
65~75 cm above the cooking plane for best effect.
Installation (Vent outside)
Note: When the cooker hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room
must be not exceed 4 Pa (4 x 10
-5
Bar).