Display; Audio; Tracking - memorex MVD4544 Guia Del Usuario

DISPLAY

1
If you set the OSD Display to OFF (see page 28, Setting
the VCR Option): While in the VCR mode, press the
DISPLAY button to view the VCR mode, counter, speed,
and Audio Setting/Video Source. After 5 seconds, the
display will disappear on the screen.
If you set the OSD Display to ON: While in the VCR mode,
press the DISPLAY button to view the VCR mode, counter,
speed and Audio Setting/Video Source. After 5 seconds,
the display will disappear on the screen. Within 5 seconds,
press the DISPLAY button twice to view the VCR mode,
counter and Audio Setting/Video source, the display will
continuously appear on the screen until you press the
DISPLAY button again. NOTE: The Display function is only
available during playback, recording or while in the VCR
Stop mode.

AUDIO

1
While playing a cassette, press the AUDIO button to select
the desired audio output (HiFi L+R, HiFi L, HiFi R or
Linear).
All manuals and user guides at all-guides.com
VCR OPERATION (CONTINUED)
32

TRACKING

1
When a cassette is playing, press the TRACKING – 1
and/or + 2 buttons to adjust the tracking for the
best picture.
2
1