IMPORTANT NOTES:
• "
" will appear on the TV screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, is dirty and/or damaged, or is not present at all, "NO DISC" will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this player that
cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not
explained in this owner's manual.
PLAYBACK OF A DVD
1
Press the POWER button to turn on the unit.
3
After loading, "DVD VIDEO" will appear on the screen and
the menu screen of the DVD should appear. Use the
Navigation (√,®,π,†) buttons 1 to select the desired
option and the OK button 2 to select it.
NOTES:
• If a MENU appears on the TV screen, press the Navigation (√,®,π,†) buttons to select the desired option/item, then
press the OK button. Please make sure to refer to the disc's jacket or case for additional information.
• Resuming playback may not work on all discs.
All manuals and user guides at all-guides.com
DVD BASIC OPERATION
2
1
1
2
While in the DVD mode (DVD button pressed first), press
the OPEN/CLOSE button to open the disc tray, "OPEN"
will appear on the screen. Insert a disc with the label side
facing up on the disc tray. Press the OPEN/CLOSE button
to close the disc tray. "CLOSE" will appear on the screen.
4
To stop playback, press the Stop (X) button 1; "PRESS
PLAY KEY TO CONTINUE" will appear on the TV screen.
Because the unit will remember where you stopped, simply
press the PLAY/PAUSE ®p button 2 to resume playback
where you left off (resuming playback).
If the Stop (X) button 1 is pressed twice, the unit will stop
completely.
37
2
1