Calorex ELEVA 4 kW V2 Manual De Instalación página 24

24 / EN
• Place the heater on the surface where it will be installed. Check that it is leveled.
• The heater must be mounted with its screws and wall plugs (included). Not using
to use the screws and wall plugs (included), can cause damage to the installation
(See Figure 4).
• Do not remove the Water Cleaning Filter that is included with the heater (See
Figure 1).
FIG.2
Correct Installation
Inlet
Inlet and
outlet on
the lower
side.
FIG.3
Close cover Steps
Outlet
A
Incorrect Installation
B