Rules Of Use - MSW Motor Technics MSW-WDH-1500N Manual De Instrucciones

1.3.
a) Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
b) Keep the unit out of the reach of children.
c) Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
d) To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
e) When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
f) Clean the unit regularly to prevent permanent dirt build-up.
g) The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
h) Do not tamper with the unit to alter its performance or design.
i) Keep the unit away from sources of fire and heat.
j) Do not overload the unit.
k) Use the unit only on a firm, level and dirt-free surface.
l) Do not allow the suspended load to drop or swing suddenly, especially when
moving the unit.
m) Do not use the unit if there is no or insufficient oil in the cylinder.
n) Do not use on wheels with diameters greater than those specified by the
manufacturer!

2. Rules of use

This product is designed to assist in the installation/removal of truck wheels,
agricultural wheels, industrial wheels, etc.
The user is responsible for any damage resulting from misuse.
Safe use of the unit
CAUTION! Although the product has been designed to be safe,
with adequate safeguards, and despite the additional safety
features provided to the user, there is still a slight risk of accident
or injury when handling the unit. You are advised to use caution
and common sense when using this product.