Preparation For Operation; Working With The Unit - MSW Motor Technics MSW-WDH-1500N Manual De Instrucciones

8. Roller supports (wheels)
9. Column locking pin
10. Swivel wheels (2x with brake + 2x without brake)
3.2.

Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Keep the unit away from any hot surfaces. Always operate the unit on
a level, stable, clean, fireproof and dry surface and out of the reach of children and
persons of impaired mental, sensory and intellectual functions.
3.3.

Working with the unit

3.3.1. Loading the wheel onto the unit
NOTE: The vehicle should be on a level, flat surface. The axle from which the
wheel is to be removed should be raised and rest securely on supports/lifts
high enough off the surface to allow the wheel to be driven under.
Up - raise the wheel/reduce distance between jacks
Down - lowering the wheel/increasing the distance between
jacks
NOTE: both sockets have the same function and differ only in
the gear ratio, i.e. the number of revolutions in relation to the
stroke.