Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Requirements
Tools and parts
Remove the packaging.
CAUTION
Remove the carton carefully. Wear gloves to protect
against sharp edges.
WARNING
Remove the protective film before putting into operation.
Parts Supplied
•
Hardware bag includes:
Part
5 x 45 mm
8 x 40 mm
3.5 x 9.5 mm
4.2 x 8 mm
3.5 x 6.5 mm
Torx adapter
Mounting screws
Mounting template
Qty
4
4
Single fan model (4)
70
Single fan model (
)
Double fan model (40)
2
#10 -
1)
Single fan model (
#20 -
1)
Single fan model (
#20 -
Double fan model (
2
1
Parts not supplied
Tools/materials required
•
Level
•
Drill with ³/₁₆'' (4.76 mm) drill bit
•
Pencil
•
Wire stripper or utility knife
•
Tape measure or ruler
•
Pliers
•
Caulking gun and weatherproof caulking compound
•
Vent clamps
•
Jigsaw
•
Metal snips
•
Screwdrivers:
- Phillips
- Flat - blade
Parts needed
•
Home power supply cable
•
½" (12.7 mm) UL listed or CSA approved strain relief
•
3 UL listed wire connectors
•
1 wall or roof cap
•
Metal vent system
1)
ENGLISH
11
Publicidad
Tabla de contenido
