Retevis RA685 Guia Del Usuario página 10

25 Direction
26 Offset
27 Key1 sp
28 Key1 LP
29 Key2 sp
30 Key2 LP
31 Memory
32 Delete
33 Alarm Mode
34 TAIL
35 PROGER
36 Language
37 Reset
38 SPECIAL DCS
Plus In frequency mode, the transmitting frequency is equal to the
receiving frequency plus the frequency difference frequency
Minus In frequency mode, the transmitting frequency is equal to the
receiving frequency minus the frequency difference frequency
00.000,...,99.998 In frequency mode, the difference between the transmitting
and receiving frequencies
OFF No function
LAMP Turn on the flashlight function
SOS Turn on the alarm function
FM Turn on the radio function
NOAA Enable NOAA weather forecast function
MONI Turn on the monitoring function
Scan Turn on the sweep function
Same function as side key 1 short press
Same function as side key 1 short press
Same function as side key 1 short press
1,...,128 When storing a channel, it is used to indicate the channel
number to be stored. If the word CH- is displayed in front of
the number, it means that the channel originally has channel
parameters
1,...,128 Delete the channel parameters of the specified channel, if
there is no CH- in front, it means that the channel has no
parameters and the operation is invalid
On site On-site alarm
Send sound Send sound
Send code Send code
OFF After the PTT is released, the machine does not send a
shutdown code, usually when it is relayed through the relay,
let it make noise to confirm whether the signal of the
machine is relayed
ON After releasing the PTT button, the machine sends a shutd-
own code to suppress the instantaneous noise of the listener
OFF Turn off the call end alert tone
ON Turn on the call end alert tone
Chinese
English
VFO Menu initialization only
ALL Menu and channel initialization
OFF Close special DCS
ON Open Menu and channel initialization, only with same DCS
can communicate
7