Causes For Damages; Home Connect User's Information; Fcc Compliance Statement; Industry Canada Statement - Bosch HUI34253UC Manual Del Usario

Causes for damages

NOTICE
Risk of damage due to corrosion. Always turn
appliance on when cooking to avoid condensation
buildup. Condensation can lead to corrosion damage.
Risk of damage due to moisture entering into the electronic
circuitry. Never clean the touch control panel with a wet
cloth.
Surface damage due to incorrect cleaning. Clean stainless
steel surfaces in the grain direction only. Do not use any
stainless steel cleaners on operator controls. Never use
strong or abrasive cleaning agents, since they can cause
surface damage.

Home Connect User's Information

Wi-Fi
Statements
CMIIT ID: 2017AJ4134 (M)
FCC: 2AHES-COM2
IC: 21152-COM2
The Home Connect module is a communication device
designed to provide communication between appliances
and smart devices.
This module is integrated at the factory, under direct
control of BSH Home Appliances Corporation, and is not
user serviceable or upgradable.
At least 20 cm separation distance should be maintained
from device to user.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifi cations not expressly
approved could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.

INDUSTRY CANADA STATEMENT

This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Module
®
FCC/IC
English 7