Samsung DW80B70 Serie Manual De Usuario página 30

Operations
07 SmartDry Hi/Lo
08 Smart Control
09 Display
30 English
DW7000B_DW80B7070_AP_EN_FULL.indd 30
• Hi – Press SmartDry Hi/Lo once to select "SmartDry
High". This option increases the rinsing temperature up to
73 ˚C and enhances the drying performance compared to
"SmartDry Low".
• Lo – Press SmartDry Hi/Lo twice to select "SmartDry Low".
This option reinforces the drying performance inside the
dishwasher through the circulation of heated air. And it
increases the cycle time accordingly.
NOTE
"SmartDry Low" is a recommended drying option by the
manufacturer.
• Off – Press SmartDry Hi/Lo three times to exit.
• SmartDry Low condition is the recommended for regular
use to completely wash a full load of normally soiled dishes.
CAUTION
• The dishwasher stays in a high temperature inside during
the SmartDry process. Do not open the door or touch any of
loaded dishes or the hot air outlet of SmartDry in the lower
right corner.
• Take caution not to clog the hot air outlet of SmartDry with
dishes. Clogged outlet will not facilitate heat circulation.
• Keep plastic dishes away from the hot air outlet of
SmartDry as they are vulnerable to heat.
• To enhance the drying performance, it is recommended to
use rinse for the SmartDry cycle.
You can monitor and control the dishwasher remotely through
a Wi-Fi connection. To connect the dishwasher to your smart
phone for the first time, press and hold Smart Control. For
more information, see the "SmartThings" section on page 37.
Displays information about the current cycle including the
cycle time, remaining time, Delay Start settings, and other
cycle-specific information.
If a problem occurs during operation, an information code
appears with a warning sound. Refer to the information codes
on page 52.
2021-12-30 10:36:10