Product Features; Default Setting - L&S MEC MODULE SMART 4 EMOTION/EDC Guia De Inicio Rapido

PRODUCT FEATURES

Power supply
Type of load
Output
Radio frequency
Protection rating
Operating
temperature
Dimensions
The connected load must not exceed the maximum power (W) of the connected Driver.
DRIVER
MEC MODULE SMART 4
SMART 4 EDC RECEIVER
12 /24 Vdc
LED with constant
voltage dual color
(EDC)
Maximum load 5A,
Maximum load for
output 3A
433.920 MHz ISM
IP20
-15 +45 °C
74,9x78x16 mm
CONNECT A MAXIMUM OF 5 MODULES TO ONE DRIVER.
SMART 4 MONO RECEIVER
12 /24 Vdc
LED with constant
voltage
mono color
Maximum load 5A,
Maximum load for
output 3A
433.920 MHz ISM
IP20
-15 +45 °C
74,9x78x16 mm

DEFAULT SETTING

- MEMO FUNCTION: The module always
restores the last setting when switched on
again (whether the module was switched
off by a remote control or due to a power
supply failure).
- TIMING: There is no set timer. To
change this setting follow the instructions
in this manual.
- FADE: There is a 0.5 second fade either
while switching a light on or off.
CAU
Risk of ele
Dry locati
Class 2 P
.ls-light.co
EN 2