ELECTRICAL SAFETY
Electric shocks can cause serious direct or indirect accidents and even death.
Never touch the torch's live parts because it is connected to the cutting circuit.
Do not touch the torch and the earth clamp at the same time.
Always use dry and undamaged clothing to insulate yourself from the cutting circuit. Wear insulated footwear, regardless of your working environment.
CAUTION FOR USE
Never wrap the torch cables around your body.
Do not use the torch to move the source of the cutting current.
The torch must be completely unwound in order to avoid overheating.
Switch off the power source after the torch has cooled down before any maintenance work and before replacing or checking worn parts.
Regularly check the torch's condition. It must be replaced if it becomes damaged.
GENERAL DESCRIPTION
SPECIFICATIONS
The MT and EASYFIT torches are designed for manual plasma cutting.
AT torches are designed for automated plasma cutting.
TECHNICAL DATA
MT
Description
Torch angle
Cable-bundle length
Part Number
Ignition voltage
Max. rated current
Duty cycle at 40°C
Gas type
Torch cooling
Ambient cutting temperature
range
Ambient storage / transport
temperature range
Switch characteristics
(trigger)
Applied standard
CUTTER 45 CT
CUTTER 70 CT
Product com-
patibility
NEOCUT 105
NEOCUT 125
EASYFIT
Description
Torch angle
10
MT / EASYFIT / AT
MT-70
75°
6 m
12 m
6 m
037502
037519
039506
500 V max.
125 A
100%
50 A
60%
65 A
50%
70 A
air
air
-10 -> +40°C
-10 -> +55°C
0.5 A / 48 V DC
0.5 A / 48 V DC
EN IEC 60974-7
EN IEC 60974-7
Handle bundle
-
MT-125
75°
12 m
039513
500 V max.
125 A
100 A
125 A
-
air
air
-10 -> +40°C
-10 -> +55°C
EASYFIT MT-70
EASYFIT MT-125
75°
15°
75°
EASYFIT MT-125 extension cable
15°
90°
15°
EN
90°
15°