Section E4: Transporting The Trophon2 Device; Section E5: Disposal Of The Trophon2 Device - Nanosonics trophon 2 Manual Del Usuario

3. Keep the power socket completely dry (see Figure 4).
4. For cleaning, when cool, wipe the chamber and the outside surfaces of the trophon2 device with
a cloth or wipe moistened with a mild, soapy solution, until all surfaces are visibly clean.
5. For disinfecting, when cool, wipe all accessible surfaces of the trophon2 device with an
Isopropanol or Quaternary Ammonium (Quat) wipe.

SECTION E4: Transporting the trophon2 Device

NOTE: The procedure below is not necessary for transportation of the device, within a facility, using the
trophon Cart.
To transport the trophon2 device:
• Purge the disinfectant. Do not insert a new disinfectant cartridge until the trophon2 device is
relocated.
Switch off the trophon2 device power switch and unplug from the mains.
•
Keep the trophon2 device upright at ALL times.
•
Pack using only Nanosonics approved packaging.
•

SECTION E5: Disposal of the trophon2 Device

The trophon2 device is not biohazardous waste and shall be dispose in accordance with applicable local
Regulations. Dispose of trophon2 devices responsibly by contacting your Nanosonics representative to
advise the appropriate collection point for the recycling of electrical and electronic equipment.
29
L03082 1.0 09/2021