Part G - Service Requirement And Warranty Provision; Section G1: Service Schedule; Appendix 1: Trophon2 Device Technical Specifications N05000 - Nanosonics trophon 2 Manual Del Usuario

PART G – SERVICE REQUIREMENT AND WARRANTY PROVISION
Contact your trophon2 representative if you have any questions about:
The trophon2 device, consumables or accessories
•
The warranty
•
Each trophon2 device has a comprehensive warranty against defects in material and workmanship for
12 months from the date of purchase. The specific warranty terms and conditions are defined in
Appendix 2: Product Warranty Terms and Conditions of this manual. Please be aware of the exclusions.
To ensure the safety and efficacy of your HLD operations, the trophon2 device requires servicing as
described below.
Modifying the trophon2 device without authorisation will void your warranty.

SECTION G1: Service Schedule

When the trophon2 device is due for service, a Service Due message will be displayed on the screen
to prompt service arrangements. The message will be indicated prior to commencing a HLD cycle at
weekly intervals until a service is performed.
Service due information can also be accessed by selecting:
Menu Maintenance

The service options found: Menu
should only be used when advised by service personnel.
Nanosonics has made the service provision available to customers through either our direct service or
our service partners including local distributors who have been trained and authorised to service the
trophon2 device. Only authorised customer service or suitably trained personnel should service the
trophon2 device with genuine parts supplied from Nanosonics.

APPENDIX 1: trophon2 Device Technical Specifications N05000-2

N05000-2 Electrical
Specification
Data port
Environmental Specification
Storage and Transport
Conditions
Physical Characteristics
Service data

Maintenance are used to troubleshoot device malfunctioning and

Rated mains input voltage: 230 V AC
Rated mains input current: 6 A, 50/60 Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using the power cable supplied with the trophon2
device.
Ethernet connector RJ45
USB Port: Type A
Operating temperature range: 17 °C to 27 °C / 62.6 °F
to 80.6 °F
Temperature range: -20 °C to +60 °C / -4 °F to +140 °F
Weight of trophon2 device:
Unpacked: 22 kg (48.5 lbs)
Packed: 25 kg (55 lbs)
Dimensions of trophon2 device:
535 mm high
(21 in high
L03082 1.0 09/2021
360 mm wide 317 mm depth
× ×
14.2 in wide 12.5 in depth)
× ×
33