Style selections SGY-GHR1 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
Install Mounting Rail to a Stud Wall
1. Locate the studs using a stud finder.
2. Position the mounting rail (D) on the wall at a
convenient height.
3. Use a level to ensure the mounting rail (D) is
horizontal.
4. Mark hole center locations on the wall.
WARNING Ensure there are no live electric
wires or plumbing in the wall where you mount
the hose reel. Always use eye-protection when
using power tools.
5. Using a 7/32" (5.5 mm) drill bit, drill pilot holes
centered on the marks you made in step 4.
6. Hang the mounting rail (D) with the lag screws,
using a Phillips screwdriver to tighten the lag
screws.
Hardware Used
BB
x 4
CC
x 4
6
3
D
4