Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
■ Category Search Mode
1
Press the [TUNER] button, and
then press the [ENTER] button
Remote
repeatedly to select Category
controller
Search mode.
This procedure can also be performed
on the AV receiver by using its
[TUNER] button, and [TUNING
MODE] button.
2
Use the Left and Right [e]/[r]
buttons to select a category, and
use the Up and Down [q]/[w] but-
tons to select a channel in that
category.
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1
Press the [TUNER] button, fol-
lowed by the [D.TUN] button.
Remote
controller
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENTER].
Note:
While the [TUNER] button is flashing,
you cannot select another input source
with the remote controller.
4
En-
All manuals and user guides at all-guides.com
MEMORY
TUNING MODE
DISPLAY
CH + / –
Selecting Channels on the AV receiver:
1
Press the [TUNING MODE] but-
ton repeatedly to select Channel
AV receiver
Search mode or Category Search
mode.
2
Press [ENTER] repeatedly to
select a category.
AV receiver
3
Use the TUNING Up and Down
[q]/[w] buttons to select a chan-
AV receiver
nel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
TUNING
/ ,
PRESET
ENTER
RETURN
DISPLAY
RETURN
Publicidad
Tabla de contenido
