Onkyo TX-SR706 Manual De Instrucciones página 38

Ocultar thumbs Ver también para TX-SR706:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SETUP
Positioning the XM Mini-Tuner System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Mini-Tuner System
accordingly.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [q]/[w] but-
tons to select "7. Hardware
Setup", and then press [ENTER]
button.
The Hardware Setup menu appears.
3
Use the Up and Down [q]/[w] but-
tons to select "3. Tuner", and
then press [ENTER] button.
The Tuner screen appears.
6
En-
All manuals and user guides at all-guides.com
RECEIVER
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
7–3. Tuner
SAT Radio Mode
XM
Antenna Aiming
4
Use the Left and Right [e]/[r]
buttons to select "XM".
Use the Up and Down [q]/[w] but-
tons to select "Antenna Aiming",
and then press [ENTER].
The Satellite Radio screen appears.
The name of the currently selected
input selector is displayed in a box.
Note:
If the SAT Radio Mode is set to "None"
(see page 2), the "Antenna Aiming"
item is not available.
5
Position the XM Mini-Tuner
Antenna so that as many bars as
possible (up to 3) appear on the
XM Satellite signal strength
meter.
The best signal is achieved when the
antenna is pointing to the southern sky
through an unobstructed window.
7–3. Tuner
XM Antenna Aiming
Satellite
If you cannot receive a satellite signal,
position the XM Mini-Tuner System so
that as many bars as possible (up to 3)
appear on the XM Terrestrial signal
strength meter.
Notes:
• So long as the signal strength is good, you can enjoy
XM Radio by using either satellite or terrestrial recep-
tion.
• Terrestrial signals are only available in certain areas.
• The XM information is only displayed when the SAT
Radio Mode is set to "XM" or "XM/SIRIUS" (see
page 2).
• If you're using both XM Satellite Radio and SIRIUS
Satellite Radio and the Satellite mode is set to
"XM/SIRIUS" (see page 2), signal strength meters for
both systems appear on the same screen.
Terrestrial

Publicidad

Tabla de contenido
loading

Tabla de contenido