AT 500BV Manual De Instrucciones página 8

STEP 3
STEP 4
Put the front plastic cover (44) to the support tube (15),
then connect the sensor 10 & 20 and tension control
wire 14 & 19 as shown and install the support tube (15)
on the main frame (48) with bolt (17) and washer (16).
Connect the sensor as shown then Install the computer
(1) into the support tube (15) with the bolt (13).
Attach the handlebar (4) to the support tube (15) with
the T bolt (6) and handle plastic cover (7).
8