Installation; Unpack The Machine - GreenWorks Pro EA80L00 Manual Del Operador

WARNING
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:
• Cover the terminals of the battery with heavy-duty
adhesive tape.
• DO NOT try to remove or destroy any of the battery
pack components.
• DO NOT try to open the battery pack.
• If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
• DO NOT put these batteries in your regular household
trash.
• DO NOT incinerate.
• DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.
• Take them to a certified recycling or disposal center.
8

INSTALLATION

8.1

UNPACK THE MACHINE

WARNING
It is not necessary to assemble the machine.
• If parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove the machine from the box.
4. Discard the box and packaging material in compliance
with local regulations.
8.1.1 ATTACH THE AUGER BIT
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
English
This auger shaft measures 7/8" in diameter. It will work with
most universal sized bits designed for this size of shaft.
1. Make sure you are using the correct bit (7) for the
material you want to drill into.
2. Align the holes in the auger shaft (9) with the holes in the
bit.
3. Open the ring pin (6).
4. Insert the ring pin through the holes.
5. Close and lock the ring pin to secure the bit to the auger
shaft.
7
EN
9
7
6