Costan Velvet Hot Table Design RCA Instrucciones De Uso Para El Usuario página 72

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Cleaning the grease trays (only with steel
top)
It is advisable to frequently clean the grease
trays placed under the steel worktop.
• Lift the PLAN and pull it out forwards.
• Lift and remove the two grease collection
trays.
F The trays have on one side a cover edge
which prevents liquids from entering
the slot between the two trays. To
replace the plates, follow the correct
sequence.
N°DOC. UM000309 REV. "C" - 31/01/22
VELVET HOT TABLE
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
Cleaning the filling sensor (only with non
demineralizzed drinking water)
It is advisable to clean the filling sensor from
limescale residue that may impair correct
functioning.
For cleaning purposes it is advisable to remove
the sensor from its location (to avoid damage
resulting from abrupt movements), by using the
screw (1).
For thorough clearing, the use of a descaling
agent is recommended.
Put the sensor back in its correct position.
Fig. 44
Cleaning the filling sensor (only with
demineralizzed drinking water)
It is advisable to clean the filling sensor from
residue that may impair correct functioning.
Fig. 45
19/26
IT
FR
EN EN
DE
ES
PT
1
Fig. 46
Fig. 47