Batavia BT-WB001 Manual De Usuario página 5

1. Explanation of the symbols
The following symbols are used in the user manual or on the product:
Warning! To reduce the risk of injury, the user must read the instruction
manual.
Denotes risk of personal injury, loss of life or damage to the tool in case
of non-observance of the instructions in this manual.
Do not dispose of electric power tools with domestic refuse.
2. Safety instructions
• Only use this product in an emergency. The car window will break immediately
when using this product.
• In case of incorrect use, the supplier is not responsible for the damage.
3. Installation
ATTENTION! Check if the window is suitable for this product.
• Laminated glass won't shatter and is therefore not suitable for this product.
• Maximum thickness of tempered glass may not exceed 8mm to guarantee
optimal functionality.
NOTE: The ideal temperature for the application of the tape is 21°C to 38°C (Appli-
cation min. temperature 15°C).
a. Clean the surface of the window with the cleaning tissue (1).
NOTE: Do not use other household cleaners.
b. Remove the release liner from the adhesive (3).
c. Position the window breaker on the rear window. Place in the highlighted
striped area near the edge of the window and keep within reach for when
needed. Keep in mind that it doesn't block your rear view (See Fig. B).
d. Press it firmly against the glass for at least 5 seconds.
NOTE: Do not turn the knob.
e. Check if the adhesive made contact with the complete surface by viewing the
other side of the glass and put more pressure if needed.
NOTE: It is important that the seat belt cutter is stored at an easy to reach place
(e.g. behind the sun visor).
Do not turn the trigger knob when its not necessary, please instruct your children
to prevent unnecessary damage.
English
5