Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch Professional GWB 12V-10 Manual Original

An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramic and
plastic, especially at hard to reach locations.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Power Light
(2) Keyless chuck
(3) Rotational direction switch
(4) On/off switch
(5) Release button for angle selection of drill head
(6) Battery charge indicator
a)
(7) Battery release button
a)
(8) Battery
(9) Handle (insulated gripping surface)
a)
(10) Screwdriver bit
a)
(11) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless angle drill/driver
Article number
Rated voltage
A)
No-load speed
Max. torque, hard/soft
screwdriving application ac-
A)
cording to ISO 5393
Max. screw diameter
Bosch Power Tools
Cordless angle drill/driver
Max. drilling diameter
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery GBA 12V
B) Measured with GBA 12V 2.0Ah and GBA 12V 6.0Ah.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-2-1:
Drilling in metal: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
GWB 12V-10
over the total working period.
3 601 C90 9..
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
V= 12
power tool and application tools, keeping their hands warm,
-1
min 0–1300
and organising workflows correctly.
Nm 11/3
mm 6
mm
mm
B)
2.0Ah.
(triax vector sum) and uncertainty K
h
2
<2.5 m/s , K = 1.5 m/s
h
1 609 92A 816 | (24.06.2022)
English | 13
GWB 12V-10
10
10
kg 1.3–1.5
°C 0 to +35
°C –20 to +50
GBA 12V...
GAL 12...
GAX 18...
2